Category: Barry Shaw

By:
Barry Shaw
March 21, 2018
Pop-Top Home

Denver New Home vs. Pop-Top: What Is The Difference In Construction Costs?

As a follow up to previous Blog re: this topic, below is a re-cap overview of our line item construction cost analysis requested of our Consulting services:

New home ‘overall requirements’ are different and more extensive, than when we ‘add on’ to the existing structure and therefore an increase in price.

Some of the additional items required involve significant site work, especially if there is a slope involved.

For instance, typically multiple retaining walls will be required to shore up aspects of the site, for the planned footprint of the new home/detached buildings/driveway/stairs/recreation areas etc. to be accommodated for at the proper elevations.

Also additional drainage work, above and below grade, will be required throughout the site. This would involve concrete culverts, underground drain pipes, terraced grades and usually retention ponds/storm water planters.

Around the lower part of the home, waterproofing the exterior walls from the bottom of the footings to above finish grade level, will be needed.

Regarding the building/structure itself, new two story concrete and rebar footings will be required, after excavating work; in lieu of using existing footings and typically adding some ‘pads’ for posts to bear on.

As well, new first floor/second floor/roof framing with up to date structural connections will be required by code.

Adjunct new materials (i.e. windows, doors, drywall, flooring, plumbing and electrical fixtures, tile work, paint, etc.) and equipment (i.e. hvac units/ducting, water heaters, kitchen appliances, etc.) and low voltage wiring, cabinetry, fire sprinkler system, closet work, etc., needs to be factored into this budget.

And all of the above is after demolition of the old existing home and other structures are taken off the site ($60,000+), if we’re not starting with raw land.

All in all, it will cost 50% or more to build your new home; but it will be exactly the way you want it to be and virtually maintenance-free with the latest technology implemented into the materials, systems and equipment.

For other Consulting services, including comprehensive line-item values, please send us an email with your inquiry.

Best Regards Always!
Barry

Read More
By:
Barry Shaw
March 7, 2018
Pop-Top Home

Denver New Home vs. Pop-Top: What Is The Difference In Architectural Fees?

We were recently contacted from a homeowner regarding our Consulting services, regarding a comparative cost analysis of Architectural services, for a new ground up home or adding a pop-top.

Below is a re-cap overview of the line item analysis:

The overall time needed for a complete set of architectural plans to be prepared for submittal to City agencies, is obviously somewhat more for a new home, but the driving factor regarding the cost increase, comes from the engineering required.

Additional structural engineering for foundations and framing; civil engineering required for site work/drainage/retaining walls, energy engineering analysis and new hvac, electrical, plumbing systems and equipment needs, all require extra time. Additionally, these details and specifications need to be coordinated with the architectural plans, in the proper places.

The above work is typically performed by our CAD drafters, with pertinent decision making and direction, coordinated by myself as the Architect for the project.

So in general, the Architect and engineering fee will be approximately 25%-35% more. As well, the construction cost ‘differential’ must also be factored into the overall budget, to obtain the total out-of-pocket expenditure for design and construction of a new home.

For other Consulting services, including comprehensive line-item construction cost analysis, send us an email with your inquiry.

Best Regards Always!
Barry

Read More
By:
Barry Shaw
February 21, 2018
LVL vs Steel

Owner’s Advocate – A Resource For Savings

A friend of mine took his car into the shop for work that he knew needed to be performed and was also advised that a ‘check-up’ should be done regarding other parts of the vehicle; he said ok.

A couple days later, a very large estimate was given to him with the explanation that his car needed additional work done and that there was only one way to accomplish this; or was there?

Similar situations can and do occur, in the construction industry with hundreds of options and decisions needed throughout the project.

An Owner’s Advocate, independent Architect, and/or General Contractor who’s fiduciary is directly to the Owner and independent from the Owner’s hired Architect and General Contractor, can provide the Owner with a separate pair of eyes, experience, and options that could benefit the Owner immensely.

For instance, lets say that during the architectural design phase of a new building project, that the engineer designs a structure with steel beams and posts, to achieve an open floor plan effect.

Well, the Owner is not likely experienced to know there is an alterntive to the steel framing. Glue laminate wood beams for instance, will save a significant amount of money and time and still accomplish the clear span request.

The steel structure will require certified welders, cranes to erect and set in place, an additional/different subcontractor and material supplier from the framer, and will require additional carpentry work when integrating with the standard wood framing members.

If the Owner had an independent Advocate/Consultant that provided a well seasoned amount of design and construction experience, he would be advised to explore the above suggested alternative, with the following benefits:

In an average size new two story home project, that we actually just completed, the cost saving differential, from not using steel, would be about: $4,500 in material + $3,000 in initial labor installation + about $2,500 in framing detailing + $1,250 in welder services + $2,500 in crane and erection + about $1,250 in special inspector services, or an additional $15,000!, just in this trade alone (imagine the additional savings available for the other 20 trades in the project!).

Actually not much different either from having an ‘insurance advocate’ on your side, independent of your insurance company and looking out for your best interest exclusively.

If you would like to explore this and other options available for your project, please send us an Inquiry and we’ll get back with you within (24) hours.

Best Always!
Barry R. Shaw AIA, GC

Read More
By:
Barry Shaw
September 28, 2017

BSA On-Call Consulting

The business structure for design and construction of a new project, whether it be a Custom Home or Commercial building, is typically contracted in one of two ways: the Owner hiring a separate Architect and separate General Contractor, or one entity that is licensed to provide both services, commonly know as a Design-Build company.

But…

in either case, who does the Owner really have, as an independent fiduciary to them only and is a seasoned Resource, looking after their personal interests exclusively and confidentially?

As an example, Barry Shaw & Associates, Inc. is currently retained as an independent Architect and General Contractor Consultant, providing On-Call Consultant services for Homeowners in Santa Monica, CA. The scope of work is a new ground up 5,000 sq. ft. home and detached Studio/Garage.

In one of our initial meetings and before a permit was pulled, just two insightful architecture/construction cost saving suggestions paid for our fee and saved the Owner’s over $20,000 in construction costs, that were slated to be spent.

This was accomplished in a collaborative manner, before plans were submitted to the building department and along with the clients architect, so drawings and specifications could be revised as needed, to optimize the cost effectiveness of future construction trade agreements.

Base Consultant Services Include:

  • Receiving direct-cost Supplier pricing for: quality, environmentally appropriate and virtually maintenance-free materials, that are available from our pool of resources over the past three decades.
  • Optimization of a cohesive team of Subcontractors, whom have proven their ability to provide a timely, cost effective and quality job, with follow-up service as needed, after the project has been completed.
  • Contract Safeguards implemented into trade ‘boiler-plate’ agreements; ensuring additional protection against excessive cost and time overruns within subcontracts.
  • Construction schedule, quality and cost saving alternatives, after review of the plans
  • Cost data cross checking throughout the job, between field work and contracts, averting runaway budget overruns.
  • Conjoining with other team members before and during construction, to provide the Owner with unrealized project benefits

Above Consulting services can be provided remotely and/or on-site and are now available from our Colorado office in the cities of: Denver, Erie, Fort Collins, Vail, Boulder, Aspen and Broomfield, as well as California cities of: Los Angeles, Pacific Palisades, Santa Monica, Westwood and Brentwood.

Adjunct Consulting Services Available Include:

  • Photographic documentation of the construction process
  • Explore/rework alternate floor plan designs for: schedule efficiency, quality and cost optimization
  • Contractor performance resolution during construction
  • Client construction job-walk analysis
  • Owner Special Requests

For more information or discussion on how our Consulting Services could best fit your needs and benefit you, please inquire at our contact page.

Best to you always!
Barry R. Shaw AIA, G.C.
Barry Shaw & Associates, Inc.
CA CO HI ID TX

Read More
By:
Barry Shaw
June 2, 2013

License and Bonding of Architects & General Contractors

Architects must first obtain a minimum of (8) years experience graduating an accredited School Of Architecture, such as Cal Poly, San Luis Obispo, along with practical full-time work with licensed Architects. This is the minimum requirement in the State Of California to even be eligible to apply for the (42) hour State Board Exams and then upon successful completion, become a licensed Architect.

Other States such as Hawaii, Idaho and Texas have varying tenure requirements. Most States though, also require Architect’s to participate in yearly continuing education courses, which adds greatly to the value of your home design and renovations.

A General Contractor (as I recall from 29 years ago anyway), must have completed (4) years of full time work with another G.C. and then be eligible for a one day exam. Upon successful completion of the exam, Surety Bonding and Workers Compensation requirements need to be met.

Also, the General Contractor’s license number is an authentication of how long he has been practicing, regardless of ‘words’. For instance in California, a G.C. license that starts with a ‘9’ indicates licensure for less than three years or so. On the other hand, a G.C. who’s license number starts with a ‘4’ has been licensed over (26) years. The lower the starting number the more experience you will benefit from.

Read More
By:
Barry Shaw
June 2, 2013

Barry Shaw, Santa Monica Architect

Barry R. Shaw AIA is a third generation Santa Monica High School grad, who took the path of architecture to new heights. He has combined his design talents with his general contracting expertise, to create a successful Design-Build system for interior, addition and new ground up single family and multifamily residential projects.

He is an alumni of the second ranked school of architecture in the U.S., Cal Poly, San Luis Obispo, as well as the first place recipient of the Los Angeles Business Council Beautification award competition, for single family residential projects. In addition, he has been a contributing writer to Professional Builder magazine regarding interior architectural design.

June B. of Santa Monica recently hired Mr. Shaw. She writes, “What people don’t see from the street is your design penchant for light, space, volume and flow. Not until someone has lived in a home over a period of months can they fairly appraise balance between form and function. Now in our new environment for six months, we can honestly say that balance is centric to the architecture”.

Barry Shaw is an astute team player, familiar with the successful processing of plans through the multiple building department requirements, as well as independent design review boards. All of his construction projects include full service on site observation, as your architect and is part of the design-build delivery package. As written by client Bert W., “You [Barry] surveyed our needs without our even knowing it during the meetings prior to drawing the plans, so that your first set of drawings was virtually perfect”.

All of Mr. Shaw’s design plans are value engineered and designed to blend into the neighborhood, while encompassing the unique characteristics of the client’s programmatic requirements.

Member of American Institute of Architects, AIA
CA Architect Lic. No. C22165
HI Architect Lic. No. AR11535
ID Architect Lic. No. AR984674
TX Architect Lic. No. 23590

CA General Contractor Lic. No. B442403
HI General Contractor Lic. No. BC26058
ID General Contractor Lic. No. RCT4418
TX General Contractor/RRP Lic. No. R-I-18942-10-01387

Read More
By:
Barry Shaw
June 2, 2013

Barry Shaw, General Contractor

Barry R. Shaw has been a licensed, practicing general contractor since 1983. He has maintained a flawless State Board record since this inception, along with an A+ surety rating. His multiple building type experience spanning across twelve states, has led to his specialty of Design-Build residential projects.

Unwittingly, some of his Santa Monica High School alumni, would be providing him with an extension of local resources, some with two or three generations of expertise, as part of his design-build package. Thus, response time to the job site is timely and efficient to the construction schedule.

His business philosophy is based on simple, straight forward professional ethics; trust, reliability, value and satisfaction. “We had a simply flawless experience and it is 100% attributable to your skill and experience”, writes client Siri Kay J.

Our open line of communication is extended to our clients via 24/7 availability. In this manner, all design and construction issues are addressed for immediate attention and most importantly, follow up results.

Mr. Shaw’s attention to detail and quality is paramount to the entire construction process. To ensure the continuity of this process, he is on the job coordinating the crews, almost on a daily basis.

The real satisfaction though, is when you see him around town well after the project has been completed and a proud smile of satisfaction is exchanged by contractor and client.

Member of American Institute of Architects, AIA
CA Architect Lic. No. C22165
HI Architect Lic. No. AR11535
ID Architect Lic. No. AR984674
TX Architect Lic. No. 23590

CA General Contractor Lic. No. B442403
HI General Contractor Lic. No. BC26058
ID General Contractor Lic. No. RCT4418
TX General Contractor/RRP Lic. No. R-I-18942-10-01387

Read More

Copyright © 2018 BSA Inc Design & Construction All Rights Reserved.